Fitting The Thermometer Sensor (If Available) - Viessmann Vitocell 100-E Installation And Service Instructions Manual

Installation sequence
Fitting the lower thermal insulation mat;...
3. Screw the adjustable feet into the supports as far
as they will go, then adjust them to level the cylin-
der.
Note
Never extend the adjustable feet beyond a total
length of 35 mm.

Fitting the thermometer sensor (if available)

2.
1.
Fig.2
1. Guide the thermometer sensor through the cover
strip and insert the thermometer.
8
(cont.)
3.
5.
2. Guide the upper thermometer sensor through the
lifting eye, insert it into the clamping bracket as far
as it will go and tighten the wing nut.
Note
The cover strip is held in its vertical position by the
straight capillaries. This is necessary for the rest of
the installation.
4.
6.
7.