Calibration; Fitness Setup - Garmin Colorado 300 Owner's Manual

Calibration

Calibrate the altimeter by entering information or
letting the Colorado determine the elevation and
pressure. The Colorado relies on barometric pressure
to determine elevation, and the pressure at any given
elevation can fluctuate. You must know the elevation
(from a map point or other reliable data) or the pressure
(calibrated to sea level) for your current location.
To calibrate the altimeter select
Setup > Calibration > �ltimeter.
1. If you know the elevation, select
the information. Select
elevation.
2. If you know the pressure select Yes. Select
you do not know the pressure.
3. A "Calibration Completed" or "Calibration Failed"
message appears after calibration is completed.

Fitness Setup

To connect an optional Garmin Heart Rate Monitor or
Garmin Bike Cadence Sensor to your Colorado, select
Shortcuts > Setup > Fitness.
Colorado Series Owner's Manual
™
Shortcuts >
Yes and enter
No
if you do not know the
No
Heart Rate Monitor—to use the Colorado with a heart
rate monitor, select On. Select
Search for a Heart Rate Monitor—selecting this
automatically begins a search for a Garmin Heart
Rate Monitor and the message "Searching" appears.
A "Connected" message appears when the Colorado
connects to a Garmin Heart Rate Monitor.
Bike Cadence Sensor—to use the Colorado with a
bike cadence sensor, select On. Select
use.
Search for a Bike Cadence Sensor—selecting this
automatically begins a search for a Garmin Bike
Cadence sensor and the message "Searching" appears.
if
A "Connected" message appears when the Colorado
connects to a Garmin Bike Cadence sensor.
NOTE: To determine if you are connected to another
Colorado, move away from other Colorado units,
sensors, or monitors.
c c
uStomIzInG the olorado
Off when not in use.
Off
when not in