Table of Contents
Advertisement
M
M
>
aIn
enu
Heading Setup
Use the Heading Setup Page to specify the type of
heading display and the type of North reference used
to calculate your heading.
Note: Unless you have a working knowledge
of headings and North referencing, it is
recommended that you use the default values.
• Display—sets the value (Cardinal Letters,
Degrees, or Mils) to show your heading.
• North Reference—provides headings based
on a true, magnetic, grid, or specific user value
north reference.
• Switch to compass heading when below (for
more than)—sets speed and time delay for
electronic compass switching. See page 49.
Calibration Setup
The Calibration Setup Page allows you to calibrate
the compass and altimeter for increased accuracy in
navigation.
Tracking System Owner's Manual F38 38
Altimeter Setup
The Altimeter Setup Page allows you to setup the
altimeter to self-calibrate each time you turn on
the unit, to function as a barometer, or to manually
calibrate when you have accurate elevation or
pressure data.
Welcome Setup
Use the Welcome Setup Page to insert a message,
such as ownership information, that appears when you
turn on your Receiver.
Tracking System Owner's Manual - Draft
1/16/2007 1:51:46 PM
Advertisement
Table of Contents
