Download Print this page

Garmin Colorado 300 Quick Start Manual

All-terrain gps navigator
Hide thumbs Also See for Colorado 300:

Advertisement

Quick Links

Waypoints
To use the Shortcuts menu:
1. Select Shortcuts. The Shortcuts
menu appears.
2. Rotate the Rock 'n Roller™ to the
preferred application and press
ENTER.
To mark a waypoint:
1. From the Map page, select
Shortcuts. Rotate the Rock 'n
Roller and select Mark Waypoint.
Mark Waypoint
The screen shows that the waypoint
on Shortcuts
was successfully saved. A three-digit
number is assigned to the new
waypoint (your current location).
2. Select Done to save the waypoint.
Select Edit to edit the waypoint
properties. Select Cancel to delete
the waypoint.
To go to a waypoint:
1. Select Shortcuts > Where To? >
Waypoints.
Waypoint Saved
2. Highlight the preferred waypoint
and press ENTER. A green circle
containing the word Go appears.
3. Press ENTER to begin navigating to
the waypoint, or press Options to
project or edit the waypoint.
4. To stop navigation, select Shortcuts
> Stop Navigation.
Waypoint Page
190-00751-01_0A.indd 1
System Status
To adjust the backlight level:
1. Press and quickly release the Power key. The System
Status page on the Colorado appears.
2. Rotate the Rock 'n Roller clockwise or counter-clockwise
to increase or decrease the backlight.
3. Select Back to close the System Status page and return to
the previous page.
Time, day, and date
Battery level
GPS signal
strength
Backlight
adjustment
System Status Page
Note: The System Status page is also a quick way to check
the time, day, date, battery level, and GPS signal strength.
Map Page
To access the Map page:
1. Select Shortcuts > Map.
2. Select Options to show the Data fields, change the Data
fields, or hide the soft key labels.
To zoom in and out on the Map page:
1. Rotate the Rock 'n Roller clockwise to zoom in.
2. Rotate the Rock 'n Roller counter-clockwise to zoom out.
Zoom scale
Zoom In View
Zoom Out View
To pan across the map:
1 Press up, down, left, and right on the Rock 'n Roller to
move the cursor on the map.
2. Select Done to stop panning.
Please visit www.garmin.com for additional
documentation and information.
190-00751-01 Rev. A © 2007 Garmin Ltd. or its subsidiaries
Printed in Taiwan
Quick Start Guide
Colorado
Series
all-terrain GPS navigator
10/19/2007 10:36:08 AM

Advertisement

loading

Summary of Contents for Garmin Colorado 300

  • Page 1 Backlight System Status Page Zoom Out View Note: The System Status page is also a quick way to check To pan across the map: the time, day, date, battery level, and GPS signal strength. 1 Press up, down, left, and right on the Rock ‘n Roller to move the cursor on the map. 2. Select Done to stop panning. Please visit www.garmin.com for additional documentation and information. 190-00751-01 Rev. A © 2007 Garmin Ltd. or its subsidiaries Map Page Colorado Zoom scale Zoom In View all-terrain GPS navigator Printed in Taiwan Quick Start Guide Series ™...
  • Page 2 3. To remove the carabiner clip, lift the bottom of the clip and If a soft key is not labeled, it is not available for that gently push down on the carabiner clip until it releases. specific page. Right soft key Soft key label Basic Operation First-time startup: Battery cover 1. Press and hold the Power key until the Garmin logo appears on the screen. Latch 2. Starting the Colorado the first time requires you to choose your language, time zone, and Daylight Saving mode. When the Language page appears, highlight the preferred language and press ENTER. 3. Highlight the preferred time zone and press ENTER. 4. Highlight the preferred Daylight Saving mode and press ENTER. The Colorado then shows the Map page.

This manual is also suitable for:

Colorado 400cColorado 400tColorado series