Attaching The Carabiner; Caring For The Colorado - Garmin Colorado 300 Owner's Manual

a
ppendIx
�ttaching the Carabiner
For convenience, a carabiner clip comes with the
Colorado.
To attach the carabiner clip:
1. Position the carabiner clip in the slots on the
mounting spine of the Colorado.
2. Slide the clip up until it locks in place.
3. To remove the carabiner clip, lift the bottom of the
clip and gently push down on the carabiner clip until
it releases.
Carabiner clip
�ttaching the Carabiner Clip to the Colorado


Caring for the Colorado

Cleaning the Case
Clean the outer case (except for the screen) using a
cloth dampened with a mild detergent solution, and
then wipe it dry. Avoid cleaners that may damage the
plastic components.
Cleaning the Screen
Clean the Colorado screen using a soft, clean, lint-free
cloth. Use water, isopropyl alcohol, or eyeglass lens
cleaner. Apply the liquid to the cloth, and then gently
wipe the screen with the moistened cloth.
Rock 'n Roller Cleaning Instructions
After prolonged use, the Colorado Rock 'n Roller may
become sticky and difficult to rotate.
To clean the Rock 'n Roller:
1. Remove the Rock 'n Roller knob by gently taking
it off the Colorado, using a small coin or your
thumbnail.
2. Wash the knob and the inside of the housing with
water. Let them dry completely.
Colorado Series Owner's Manual
™