Gaggia SYNCRONY DIGITAL Operating Instructions Manual page 31

To dispense 1 coffee, place a single cup
beneath the coffee spouts and press the button
(22, 23 or 24) only once; to dispense 2
coffees, place two cups beneath the coffee
spouts and press the button (22, 23 or 24)
twice; the display will show:
2 SMALL COFFEES
In this operating mode, the appliance
automatically grinds and measures out the
right quantity of coffee; making two coffees
requires two grinding and dose dispensing
cycles, which are automatically managed by
the machine.
• Then the brewing cycle starts.
• After undergoing a pre-brewing cycle, coffee
will start to come out of the spout (Fig.01- 13).
The coffee will stop flowing automatically
when the preset level is reached (see section
7.3). You can interrupt the flow of coffee at
any time by pressing the button (Fig.01- 22,
23 or 24).
7.2 Making coffee with pre-ground
coffee
In this operating mode, you must use
the scoop provided (Fig.01 - 21) to
measure out the ground coffee.
Only use ground coffee suitable for
espresso coffee machines in the
ground coffee dispenser (5); placing coffee
beans, instant coffee or other materials
inside the dispenser will cause damage to
the appliance.
Keep fingers away from the ground
coffee dispenser since there are
moving parts.
Use the scoop provided (21) to measure out the
right quantity of ground coffee to place in the
dispenser.
Use only one full measuring scoop at a time; to
make two coffees, you must go through the entire
process twice.
• Press the button (25) to select the function;
the display will show
SELECT PRODUCT
PREGR. COFFEE
• Lift the lid of the ground coffee dispenser.
• Fill the scoop with one measure of coffee;
discard any excess ground coffee.
• Fill the dispenser with the ground coffee
(Fig.08)
• Close the lid of the ground coffee dispenser.
• To dispense coffee, press the coffee brew
button (22, 23 or 24); the display will show
(for example)
1 SMALL COFFEE
PREGR. COFFEE
• The brewing cycle will start.
• After undergoing a pre-brewing cycle, coffee
will start to come out of the spout (13).
The coffee will stop flowing automatically when
the preset level is reached (see section 7.3).
You can interrupt the flow of coffee at any
time by pressing the button (22 23 or 24).
• Subsequently the machine will automatically
switch back to the normal operating mode
(see section 7.1).
7.3 Adjusting the quantity of coffee per
cup
The machine has been programmed to dispen-
se 3 espresso coffee serving sizes: small coffee
with button 22, normal coffee with button 23
and large coffee with button 24.
To adapt the programmed settings to the size of
your cups, place a cup beneath the coffee spouts
(13), press the selector button corresponding to
the coffee serving size you want (22, 23 or 24)
and keep it pressed down; the display will show
(for example):
1 COFFEE
PROGR. QUANTITY
Wait for the cup to fill to the desired level and
release the button.
Note: keep the button (23) or (24)
pressed during the entire coffee
brewing process.
• 31 •
ENGLISH