Raising And Locking The Wing Decks - Toro Z Master Professional 7500-D Series Operator's Manual

Raising and Locking the
Wing Decks
1. Ensure that all persons are clear of the deck
wings.
2. Park the machine on a level surface, disengage
the blade-control switch, and engage the parking
brake.
3. Press and hold the top of the deck-control
switch; the center deck will raise first, then the
wing decks.
4. Shut off the engine, remove the key, and wait
for all moving parts to stop before leaving the
operating position.
5. Remove the clevis pin and hairpin cotter from
the storage location and secure each wing in the
upright position (Figure 24
Figure 24
1. Pin storage location
and Figure 25).
1
g363149
31
2
Figure 25
1. Clevis pin
1
g363150
2. Hairpin cotter