Checking The Safety-Interlock System - Toro Z Master Professional 7500-D Series Operator's Manual

Checking the Safety-Interlock System

Service Interval: Before each use or daily
WARNING
If the safety-interlock switches are disconnected or damaged, the machine could operate
unexpectedly, causing personal injury.
• Do not tamper with the interlock switches.
• Check the operation of the interlock switches daily and replace any damaged switches
before operating the machine.
Note:
If machine does not pass any of these tests, do not operate the machine. Contact an Authorized
Service Dealer.
Note:
To prevent engine cut-outs on rough terrain, the seat has a half-second delay before the engine begins
to shutdown.
Checking the Normal Engine-Starting Chart
State of the System
*: The starter will crank with the PTO switch in the O
the PTO and a reset PTO error will occur. Engaging the PTO will require the operator to reset the PTO switch
by turning it O (pushed down) and then turning it O
FF
Motion Control
Levers/Parking Brake
Both Levers Out =
Parking Brake Engaged
Both Levers Out = Up position, but blades
Parking Brake Engaged
System
PTO
Blades disengaged In the seat or out of
In the seat or out of
disengaged*
(pulled up) position; however, the system will disengage
N
.
N
21
Operator Outcome
Starter should crank
the seat
Starter should crank
the seat