After Operation
After Operation Safety
General Safety
•
Engage the parking brake, shut off the engine,
remove the key, and wait for all moving parts to
stop before leaving the operator's position. Allow
the machine to cool before servicing, adjusting,
fueling, cleaning, or storing it.
•
Clean grass and debris from the cutting unit,
muffler, drives, and engine compartment to help
prevent fires. Clean up oil or fuel spills.
•
Shut off the fuel and remove the key before storing
or transporting the machine.
Using the Drive Train Brake
Release
The drive train brake releases are located on each of
the wheel-motor gearboxes.
Releasing the drive train brake allows you to push the
machine without the engine running.
1.
Park the machine on a level surface.
2.
Chock or block the wheels.
3.
Remove and retain the bolts from the gearbox
(Figure
33).
4.
Flip the cap inward to the gearbox.
5.
Using the retained bolts, tighten the flipped cap
until the brake releases.
6.
Reverse this procedure to apply the brake.
1. Wheel motor gearbox
2. Cap
36
3
Figure 33
3. Bolts
1
3
2
g353165