Controls; Horizon Display Monitor - Toro Z Master Professional 7500-D Series Operator's Manual

Controls

Become familiar with all the controls before you start
the engine and operate the machine.
Control Panel
1. Deck lift and wing deck
fold/unfold switch
2. Key switch
3. Blade-control switch
(power takeoff)
Figure 5
4. High-Low speed range
switch

5. Horizon display monitor

Horizon Display Monitor
Refer to the Software Guide for detailed information
explaining the operator interface that allows you to
access information, reset counters, modify system
settings, and troubleshoot the equipment.
g362360
1. Screen
2. LED status light
Information Screen
The information screen displays information relative
to machine operation; refer to the Software Guide for
more information.
Buttons
The multi-functional buttons are located at the bottom
of the panel. The icons displayed on the information
screen above the buttons indicate the current function.
The buttons allow you to select the engine speed and
navigate through system menus.
Refer to the Software Guide for more information.
LED Status Light
The LED status light is multi-colored to indicate the
system status and is located on the right side of the
panel. During startup, the LED illuminates red to
orange to green to verify functionality.
14
Figure 6
Horizon Display Monitor
3. Buttons
g362697