Maintenance And Service - Bosch IXO Original Instructions Manual

32 | English
If the drill spindle is blocked, do not press the on/off switch (7) for
u
longer than 15 seconds. Otherwise, the power tool may become dam-
aged.
Practical advice
Only apply the power tool to the screw when the tool is switched off.
u
Rotating application tools can slip off.

Maintenance and Service

Maintenance and Cleaning
Before any work on the power tool (e.g. maintenance, tool change,
u
etc.) as well as during transport and storage, set the rotational direc-
tion switch to the middle position. There is risk of injury from uninten-
tionally pressing the on/off switch.
To ensure safe and efficient operation, always keep the power tool
u
and the ventilation slots clean.
If the battery is no longer working, please contact an authorised after-sales
service agent for Bosch power tools.
In order to avoid safety hazards, if the power supply cord needs to be re-
placed, this must be done by Bosch or by an after-sales service centre that
is authorised to repair Bosch power tools.
In all correspondence and spare parts orders, please always include the
10‑digit article number given on the nameplate of the product.
After-Sales Service and Application Service
Our after-sales service responds to your questions concerning maintenance
and repair of your product as well as spare parts. You can find explosion
drawings and information on spare parts at: www.bosch-pt.com
The Bosch product use advice team will be happy to help you with any ques-
tions about our products and their accessories.
In all correspondence and spare parts orders, please always include the
10‑digit article number given on the nameplate of the product.
Great Britain
Robert Bosch Ltd. (B.S.C.)
P.O. Box 98
1 609 92A 66B | (10.12.2020) Bosch Power Tools