Bosch IXO Original Instructions Manual page 14

The stated vibration level and noise emission value represent the main ap-
plications of the power tool. However, if the power tool is used for other ap-
plications, with different application tools or is poorly maintained, the vibra-
tion level and noise emission value may differ. This may significantly in-
crease the vibration and noise emissions over the total working period.
To estimate vibration and noise emissions accurately, the times when the
tool is switched off or when it is running but not actually being used should
also be taken into account. This may significantly reduce vibration and noise
emissions over the total working period.
Implement additional safety measures to protect the operator from the ef-
fects of vibration, such as servicing the power tool and application tools,
keeping their hands warm, and organising workflows correctly.
Assembly
Before any work on the power tool (e.g. maintenance, tool change,
u
etc.) as well as during transport and storage, set the rotational direc-
tion switch to the middle position. There is risk of injury from uninten-
tionally pressing the on/off switch.
Battery Charging (see figure A)
Do not use any other charger. The supplied charger is matched to the
u
lithium-ion battery that is fitted in your power tool.
Pay attention to the mains voltage. The voltage of the power source
u
must match the voltage specified on the rating plate of the charger. Char-
gers marked 230 V can also be operated at 220 V.
Note: The battery is supplied partially charged. To ensure full battery capa-
city, fully charge the battery in the charger before using your power tool for
the first time.
The lithium-ion battery can be charged at any time without reducing its ser-
vice life. Interrupting the charging process does not damage the battery.
The li-ion battery is protected against deep discharge. When the battery is
discharged, the power tool is switched off by means of a protective circuit:
The application tool stops moving and you can hear a soft whistling sound.
Do not continue to press the On/Off switch after the power tool has
u
automatically switched off. The battery can be damaged.
Bosch Power Tools
English | 29
1 609 92A 66B | (10.12.2020)