Maintenance And Service - Bosch PSR Select Original Instructions Manual

LED
Red continuous light
Temperature-dependent overload protection
In normal conditions of use, the power tool cannot be overloaded. If the
power tool is overloaded or the permitted battery temperature is exceeded,
the electronics of the power tool will switch off until the temperature returns
to within the optimum operating temperature range.
Practical advice
Only apply the power tool to the screw/nut when the tool is switched
u
off. Rotating tool inserts can slip off.

Maintenance and Service

Maintenance and Cleaning
Before any work on the power tool (e.g. maintenance, tool change,
u
etc.) as well as during transport and storage, set the rotational direc-
tion switch to the middle position. There is risk of injury from uninten-
tionally pressing the on/off switch.
To ensure safe and efficient operation, always keep the power tool
u
and the ventilation slots clean.
If the battery is no longer working, please contact an authorised after-sales
service agent for Bosch power tools.
In order to avoid safety hazards, if the power supply cord needs to be re-
placed, this must be done by Bosch or by an after-sales service centre that
is authorised to repair Bosch power tools.
After-Sales Service and Application Service
Our after-sales service responds to your questions concerning maintenance
and repair of your product as well as spare parts. You can find explosion
drawings and information on spare parts at: www.bosch-pt.com
The Bosch product use advice team will be happy to help you with any ques-
tions about our products and their accessories.
In all correspondence and spare parts orders, please always include the
10‑digit article number given on the nameplate of the product.
Bosch Power Tools
English | 33
Capacity
< 30%
1 609 92A 84N | (21.07.2022)