Table of Contents
Advertisement
Menu List
When you press the [MENU] button, the menu is shown on this unit's display and on the display connected to the OUTPUT PREVIEW connector.
1: Project
Menu
New
Open
Project Settings
Project Utility
New Project
Menu
Project Name
Mode
Priority
Project Settings
Menu
Project Name
Mode
Priority
Default Clip Length
Auto Marker
LIVE IN Title
Position
REPLAY Title
Position
Playback Audio Source
34
Value
(Bold: default)
[ENTER]
[ENTER]
[ENTER]
[ENTER]
Value
(Bold: default)
YYYYMMDDHHMM
-
Resolution
Frame Rate
Value
(Bold: default)
YYYYMMDDHHMM
-
-
1.0–7.0–60.0sec
Off, 1–60min
Off, On
Left
Top, Right Top, Left Bottom,
Right Bottom
Off, On
Left
Top, Right Top, Left Bottom,
Right Bottom
REPLAY
LIVE IN
MEMO
5 If "[Enter]" is shown for the setting value, you can press the
[VALUE] knob to proceed to a lower-level menu.
5 Press the [VALUE] knob to execute an operation.
5 By turning the [VALUE] knob while pressing it, you can
change the value more greatly.
5 Long-pressing the [VALUE] knob returns the currently
selected menu item to its default value.
Explanation
Creates a new project.
Shows the list for selecting a project.
Switches to the project settings menu.
Switches to the project utility menu.
Explanation
Input the project name here. (The default value is the date and time.)
Selects the playback mode.
A recording and playback mode in which resolution is given priority. This is
effective for high-definition video.
A recording and playback mode in which frame rate is given priority. This is
effective for video with rapid motion, such as sporting events.
Explanation
Input the project name here. (The default value is the date and time.)
Shows the playback mode.
Sets the length of clips created using the MAKE CLIP function.
Automatically adds markers while you are recording, at the intervals you
specify.
Turns the title on/off that is used when displaying the LIVE IN bus.
Sets the display position of the lower third that is shown in LIVE IN.
Turns the title on/off that is used when displaying the REPLAY bus.
Sets the display position of the lower third that is shown in REPLAY.
Uses the REPLAY sound for the audio during replay.
Uses the LIVE IN sound for the audio during replay.
Advertisement
Table of Contents
