Table of Contents
Advertisement
Adjusts the zoom of the inset screen
View Zoom
video.
Sets the border color for the inset screen
Border Color
video.
Sets the border width for the inset screen
Border Width
video.
SPLIT
Type
Sets the scene type.
Pattern
Sets the split composite pattern.
Center
Sets the split position.
Sets the channel for the left/upper split
A-Ch(Left/Upper)
video.
Sets the channel for the right/lower split
B-Ch(Right/Lower)
video.
Adjusts the horizontal/vertical position of
A-Center
the left/upper split video.
Adjusts the horizontal/vertical position of
B-Center
the right/lower split video.
Border Color
Sets the border color for the split.
Border Width
Sets the border width for the split.
* For details on the parameters, refer to "Menu List" (p. 36).
3 .
Press the [MENU] button to close the menu.
Switching between input video (LIVE IN1/LIVE IN2/
PinP/SPLIT)
1 .
Press the INPUT [SELECT] button.
Each time you press the button, the video switches in this order:
"LIVE IN1" 0 "LIVE IN2" 0 "PinP" 0 "SPLIT" 0 "LIVE IN1. "
MEMO
You can directly switch the input video by holding down the [EXIT]
button and pressing the INPUT [SELECT] button several times, and
then releasing the [EXIT] button after you've selected the desired
video.
Assigning the Output Buses
The P-20HD features three internal output buses (Main, Preview and
Replay).
You can set which output bus is assigned to the PREVIEW OUTPUT
connector.
Press the [MENU] button 0 "Video Output" 0
1 .
select "PREVIEW OUTPUT," and press the [VALUE]
knob.
The menu related to output video is shown.
2 .
Use the [VALUE] knob to select "Output Assign," and
press the [VALUE] knob.
3 .
Use the [VALUE] knob to select the output bus, and
press the [VALUE] knob.
4 .
Press the [MENU] button to close the menu.
Adjusting the Video
25
Advertisement
Table of Contents
