Table of Contents
Advertisement
Other Functions
Recalling the saved settings
This is how to load a file saved on a SD card or USB flash drive back
into this unit. When you load the settings, the current settings in this
unit are overwritten.
Press the [MENU] button 0 "SD Card/USB
1 .
Memory" 0 select "Load Settings," and press the
[VALUE] knob.
2 .
Use the [VALUE] knob select the file that you want
to recall, and press the [VALUE] knob.
A confirmation message appears.
3 .
Select [OK] and press the [VALUE] knob.
The settings are now loaded.
4 .
Press the [MENU] button to close the menu.
32
Formatting an SD Card
When using an SD card for the first time, you must format it on the
P-20HD.
NOTE
5 The P-20HD does not recognize SD cards that were not formatted
on this unit.
5 Formatting the media erases all data saved on the SD card (such
as this unit's settings, video and audio data). If the storage media
contains important data, back the data up to your computer
before you format it.
Press the [MENU] button 0 "SD Card/USB
1 .
MEMORY" 0 "SD Card" 0 select "Format" and
press the [VALUE] knob.
A confirmation message appears.
* If you decide to cancel, press the [EXIT] button.
2 .
Select "OK" and press the [VALUE] knob.
The SD card is now formatted.
3 .
Press the [MENU] button to close the menu.
NOTE
Formatting the SD card erases all data on the media (video and
audio data).
Turning Off the Power from the Menu
In addition to using the [POWER] switch on the P-20HD to shut down
the power, you can also power down this unit from the menu.
This method is useful when you want to turn the power on/off
from the primary side of the AC adaptor. Leave the [POWER] switch
pressed in, and instead turn off the power from the menu.
Press the [MENU] button 0 "System" 0 select
1 .
"Shutdown," and press the [VALUE] knob.
A confirmation message appears.
* If you decide to cancel, press the [EXIT] button.
2 .
Use the [VALUE] knob to select "OK," and press the
[VALUE] knob.
The unit turns off.
MEMO
To turn on this unit normally using the [POWER] switch, press the
[POWER] switch once, and then press it again once the switch is in
the off position.
Advertisement
Table of Contents
