Advertisement
5@3F9AF9 R@7 4SD4Q AF R@7
@736D3EH 3F6 8PGFR 6AP75RAGF
AF6A53RGPQ È8sq É
By slackening the two screws (2-3-Fig. 23) the two side
covers of the direction indicators may be removed and
the headlamp reflector unit released.
Access is thus obtained to the two bulbs of the direction
indicators.
The front grille and headlamp unit must be dismantled so
as to change the headlamp bulbs.
Access to the bulbs may be gained from behind the re-
flectors.
To remove them unscrew the 2 central screws (4-Fig.
24) the 2 screws at the side (1-2-Fig. 24), the screw at
the front (4-Fig. 23) and release the 8 clips (3-Fig. 24).
a
Proceed with care.
Do not damage the tangs and/or their seats.
Handle the painted components with care
and avoid scraping or damaging them.
c
Upon reassembly, correctly position the
base (5) of the rear mirror.
5@3F9AF9 R@7 4SD4Q AF R@7 P73PD3EH
3F6 P73P 6AP75RAGF AF6A53RGPQ
È8sq !É
Unscrew the two screws (1).
In this way the 3 transparent covers (2-3) are removed
and the bulbs are accessible.
25
Advertisement
