Advertisement
E 3AF R7F 3 F5 7 AF QRP S5 RA GF Q
8PGFR 4P3C7 È8sq É
This vehicle is provided with front hydraulic disc brake.
When the disc pads wear out, the level of the fluid de-
creases to automatically compensate for their wear.
Periodically check the brake fluid level in the tank and
the wear of the pads, see p. 18 (CHECKING THE PAD
WEAR).
P73P 6PSE 4P3C7
a
The brakes are the parts that most ensure
your safety and for this reason they must al-
ways be perfectly working.
ADJUSTING THE BRAKE
N
Measure the distance covered by the lever (9-Fig. 3)
before the brake starts it braking action.
The idle stroke at the end of the brake lever must be
about 5 ÷ 10 mm.
N
Adjust the clearance by acting on the adjuster
(1-Fig. 15).
N
Put on the brake (9-Fig. 3) repeatedly and make sure
that the wheel turns freely after the brake has been re-
leased.
N
Check the braking efficiency.
a
For any doubt regarding the perfect func-
tioning of the braking system and in case
you are not able to carry out the usual
checking operations, contact your
Dealer.
Official
e€‚svse
15
Advertisement
