Advertisement
10
N
Press the start push button "
erating, then release it as soon as the engine starts.
a
Avoid pressing the start push button "
(3) when the engine is running: this may
damage the starter.
When the start push button "
stroke oil reserve warning light "
With the engine in running condition, when the start
r
push button "
" is released, the 2 stroke oil reserve
j
warning light "
" must go out; if this does not oc-
cur, top up the 2 stroke oil tank
N
If the starting is carried out with cold engine, rotate the
e
cold start lever "
" (1-Fig. 10) downwards.
N
Do not accelerate and pull the brake levers at the
same time until you move off.
N
Warm the engine up before leaving.
N
Once the engine has warmed up, rotate the cold start
e
lever "
" (1-Fig. 10) upwards.
r
" (1-Fig. 9) without accel-
r
r
" is pressed, the 2
j
" comes on.
.
"
Advertisement
