Advertisement
5@75CAF9 R@7 Q@G7 U73P È8sq %É
Check the wear of the rear brake shoes after the first
500 km and successively every 4000 km.
c
Remember: 1 mile = 1.6 km
1 km = 0.625 miles
To check the wear of the rear brake shoes, proceed as
follows:
N
Remove the rear wheel, see p. 17 (REMOVING THE
REAR WHEEL).
N
To check the thickness of the friction material, which
must never be less than 1 mm (Fig. 19).
18
a
If the minimum allowed limit has been
reached, if you notice any irregularity in the
operation or if any part is damaged, contact
your
Official Dealer, who will provide for
e€‚svse
changing the brake shoes.
5@75CAF9 R@7 4P3C7 H36 U73P
Check the brake pad wear after the first 500 km and suc-
cessively every 2000 km.
c
Remember: 1 mile = 1.6 km
1 km = 0.625 miles
The wear of the brake pads depends on the use, on the
kind of drive and on the road. The wear will be greater
when the vehicle is driven on dirty or wet roads.
To carry out a rapid checking of the wear of the front
pads, proceed as follows:
N
Position the vehicle on the centre stand.
N
Remove the brake caliper cover.
N
Carry out a visual checking of the friction material
thickness by looking between the brake caliper and
the pads.
If the thickness of the friction material (even of one pad
c
only) has reduced to about 1 mm, replace both pads.
Have the pads changed by your
cial Dealer.
Offi-
e€‚svse
Advertisement
