Advertisement
P7EGTAF9 R@7 P73P U@77D È8sq $É
a
Before carrying out the following opera-
tions, let the engine and the silencer cool
down until they reach room temperature, in
order to avoid burns.
N
Position the vehicle on the centre stand.
N
Unscrew and remove the two screws (1) and (2).
N
Slacken the two screws that hold the exhaust silencer
to the cylinder (access through the battery compart-
ment)
N
Remove the silencer (4).
c
Upon reassembly, change the exhaust man-
ifold-silencer seal.
N
Put on the rear brake (9 - Fig. 3) to lock the wheel.
N
Unscrew and remove the wheel nut (3) and the wash-
er.
c
Upon reassembly, change the wheel nut
(special type).
Wheel nut driving torque: 110 Nm (11 kgm).
N
Withdraw the wheel.
17
Advertisement
