National Instruments FieldPoint cFP-21 Series Quick Start Manual page 4

324033b.fm Page 4 Wednesday, September 14, 2005 2:09 PM
Mounting the Backplane on a Panel
1. Fasten the panel-mount plates to the back of the cFP-BP-x using a
number 2 Phillips screwdriver and the 8-32 × 5/16 in. countersink screws
shipped with the kit.
Do not use screws longer than 5/16 in. to fasten the
Caution
panel-mount plates to the backplane.
102 mm
(4 in.)
cFP-21xx Quick Start Guide
N A L T S
T IO M EN
N A R U
IN ST
457 mm (18 in.)
4 ni.com