Serial Ports - National Instruments FieldPoint cFP-21 Series Quick Start Manual

324033b.fm Page 21 Wednesday, September 14, 2005 2:09 PM
Maximum number of banks.............. Determined by network topology
Memory
cFP-2100........................................... 64 MB nonvolatile;
cFP-2110........................................... 64 MB nonvolatile;
cFP-2120........................................... 128 MB nonvolatile;
Memory lifetime (nonvolatile).......... 300,000 writes per sector
For information about the memory used by the LabVIEW Real-Time Module and
the operating system, go to

Serial Ports

cFP-2100........................................... One RS-232 serial port
cFP-2110........................................... Two RS-232 serial ports
cFP-2120........................................... Three RS-232 serial ports;
RS-232 (DTE) serial ports
Baud rate .................................... 110 to 115,200 bps
Data bits...................................... 5, 6, 7, 8
Stop bits...................................... 1, 1.5, 2
Parity .......................................... Odd, Even, Mark, Space
Flow control ............................... RTS/CTS, XON/XOFF, DTR/DSR
© National Instruments Corporation
64 MB DRAM
128 MB DRAM
128 MB DRAM
and enter
ni.com/info rdfpec
one RS-485 serial port
21
.
cFP-21xx Quick Start Guide