Electromagnetic Compatibility - National Instruments FieldPoint cFP-21 Series Quick Start Manual

324033b.fm Page 24 Wednesday, September 14, 2005 2:09 PM
Operating shock
(IEC 60068-2-27).............................. 50 g, 3 ms half sine,
Safety
This product is designed to meet the requirements of the following standards of
safety for electrical equipment for measurement, control, and laboratory use:
• IEC 61010-1, EN 61010-1
• UL 61010-1
• CAN/CSA-C22.2 No. 61010-1
Note For UL, hazardous location, and other safety certifications, refer
to the product label or visit
number or product line, and click the appropriate link in the Certification
column.

Electromagnetic Compatibility

Emissions.......................................... EN 55011 Class A at 10 m
Immunity........................................... EN 61326:1997 + A2:2002, Table 1
CE, C-Tick, and FCC Part 15 (Class A) Compliant
Note For EMC compliance, operate this device with shielded cabling.
cFP-21xx Quick Start Guide
18 shocks at 6 orientations;
30 g, 11 ms half sine,
18 shocks at 6 orientations
, search by model
ni.com/certification
FCC Part 15A above 1 GHz
24 ni.com