Cisco Firepower 2100 Getting Started Manual page 89

Firepower Threat Defense Deployment with a Remote FMC
Procedure
Step 1 Choose Devices > Device Management, and click the Edit (
Step 2
Click Interfaces.
Step 3
Click Edit (
The General tab appears.
a) Enter a Name up to 48 characters in length.
For example, name the interface inside.
b) Check the Enabled check box.
c) Leave the Mode set to None.
d) From the Security Zone drop-down list, choose an existing inside security zone or add a new one by
clicking New.
) for the interface that you want to use for inside.
) for the firewall.
Cisco Firepower 2100 Getting Started Guide
Configure Interfaces
87