Cisco Firepower 2100 Getting Started Manual page 40

Complete the FTD Initial Configuration Using FDM
2. NTP Time Server—Select whether to use the default NTP servers or to manually enter the addresses
of your NTP servers. You can add multiple servers to provide backups.
c) Select Start 90 day evaluation period without registration.
Do not register the FTD with the Smart Software Manager; all licensing is performed on the FMC.
d) Click Finish.
e) You are prompted to choose Cloud Management or Standalone. For FMC management, choose
Standalone, and then Got It.
Step 3 (Might be required) Configure a static IP address for the Management interface. See the Management interface
on Device > Interfaces.
If you want to configure a static IP address, be sure to also set the default gateway to be a unique gateway
instead of the data interfaces. If you use DHCP, you do not need to configure anything.
Step 4 If you want to configure additional interfaces, including an interface other than outside or inside, choose
Device, and then click the link in the Interfaces summary.
See Configure the Firewall in Firepower Device Manager, on page 22
interfaces in FDM. Other FDM configuration will not be retained when you register the device to FMC.
Step 5 Choose Device > System Settings > Management Center, and click Proceed to set up FMC management.
Step 6 Configure the FMC Details.
Cisco Firepower 2100 Getting Started Guide
38
Firepower Threat Defense Deployment with FMC
for more information about configuring