Cisco Firepower 2100 Getting Started Manual page 152

Onboard an FTD Using Credentials and IP Address
Procedure
Step 1 In the CDO navigation pane, click Devices & Services, then click the blue plus button (
device.
Step 2 Click the FTD card.
Step 3 Click Use Credentials.
Step 4
Complete the Device Name area fields.
Figure 43: Device Name
a) Choose the Secure Device Connector that this device will communicate with. The default SDC is displayed
but you can change it by clicking the SDC name.
b) Enter the device name in the Device Name field. This could be the hostname of the device or any other
name you choose.
c) For the Location, enter the IP address, hostname, or FQDN.
The default port is 443. You can change the port number to reflect your device's configuration.
d) Click Next.
Step 5
In the Database Updates area, check or uncheck the Immediately perform security updates, and enable
recurring updates, and click Next.
This option immediately triggers a security update as well as automatically schedules the device to check for
additional updates every Monday at 2AM. See
Database Update
Note
Step 6
In the Credentials area, enter the username as admin and enter the password that you set during initial setup.
Then click Next.
Cisco Firepower 2100 Getting Started Guide
150
for more information.
Disabling this option does not affect any previously scheduled updates you may have configured
through FDM.
Firepower Threat Defense Deployment with CDO
Update FTD Security Databases
) to Onboard a
and Schedule a Security