Configure Licensing
Step 5
Enter the registration token in the ID Token field.
You can optionally check the Force registration check box to register an ASA that is already registered, but
that might be out of sync with the Smart Software Manager. For example, use Force registration if the ASA
was accidentally removed from the Smart Software Manager.
Step 6
Click Register.
The ASA registers with the Smart Software Manager using the pre-configured outside interface, and requests
authorization for the configured license entitlements. The Smart Software Manager also applies the Strong
Encryption (3DES/AES) license if your account allows. ASDM refreshes the page when the license status is
updated. You can also choose Monitoring > Properties > Smart License to check the license status,
particularly if the registration fails.
Step 7
Set the following parameters:
Cisco Firepower 2100 Getting Started Guide
210
ASA Deployment with ASDM