Operation; Display; During Operation; During Regeneration - Pentair EVOLIO 255 740 Installer Manual

Installer manual Evolio 255 740-760 - Operation
7

Operation

7.1

Display

7.1.1

During operation

Depending of the clock mode programmed, display shows:
• P10=0, current time in 12 am/pm alternating with remaining capacity in US gallons;
• P10=1, current time in 24 hours alternating with remaining capacity in cubic meters.
• The current time in 24 hours is displayed:
• The remaining capacity (in m
7.1.2

During regeneration

• A "C#" is displayed to show the current cycle;
• total regen time remaining in minute is displayed on
screen;
• you can press and hold
remaining.
7.2

Manual regeneration

Mandatory
The controller must be in service in order to enable this procedure.
Info
The unit returns to normal operation if no buttons are pressed within 30 seconds.
7.2.1

Manual delayed regeneration

1. Press once for delayed regeneration.
ð The regeneration will start on the scheduled time. See chapter 5.1. Display, page 39.
ð A flashing regen symbol will be displayed.
54 / 90
3
) is displayed:
to show current cycle time
Ref. MKT-IM-037 / D - 25.10.2021