History Value; Resetting The Controller - Pentair EVOLIO 255 740 Installer Manual

Cycle Salt
setting
C7 L
S
H
C8 L
S
H
5.5.2

History value

To access history values, press and hold
Diagnostic Description
Code
H0 Resin volume
H1 Day since last regeneration
H2 Current flow rate
H3 Water used today (since time of regeneration)
H4 Water used since last regeneration
H5 Total water used (less significant digit)
H6 Total water used (most significant digit)
H7 Average usage for Sunday
H8 Average usage for Monday
H9 Average usage for Tuesday
H10 Average usage for Wednesday
H11 Average usage for Thursday
H12 Average usage for Friday
H13 Average usage for Saturday
5.5.3

Resetting the controller

CAUTION
Resetting the controller will delete all information stored in its volatile memory,
except the time, day and some of the history values from the non-volatile memory.
This will require a complete reprogramming of the controller as done from the initial
power-up mode.
To reset the controller:
1. Press and hold
ð H0 and the system's set resin volume (or "F" mode) will be displayed.
2. If a history value other the "H0" is displayed, use
is displayed.
Ref. MKT-IM-037 / D - 25.10.2021
Evolio 255 10 Evolio 255 15
1 min
1 min
2 min
4 min
and
and for 5 seconds.
Installer manual Evolio 255 740-760 - Programming
Evolio 255 20
1 min 1 min
2 min 3 min
5 min 7 min
8 min 11 min
for 5 seconds to view the "H" levels.
to scroll through the settings until "H0"
Evolio 255 30
1 min
4 min
9 min
15 min
Unit Range
l 5 - 80
days 0 - 255
l/min 0 - 177
l/min 0 - 6553.6
3
m 0 - 6553.6
3
m 0 - 9999
3
m 0 – 4264 x 10
3
m 0 - 6553.6
3
m 0 - 6553.6
3
m 0 - 6553.6
3
m 0 - 6553.6
3
m 0 - 6553.6
3
m 0 - 6553.6
3
m 0 - 6553.6
4
47 / 90