Canon DADF-J1 Service Manual page 87

CHAPTER 2 OPERATIONS AND TIMING
3) The feeding belt is rotated to move the original to the reversing assembly. At this time,
the leading edge of the 1st original is butted against the reversing roller to remove the
skew.
Butted.
4) The reversing roller and the feeding belt are rotated to move the original to the
copyboard glass.
The 1st original is moved over a specific distance by the feeding belt after its trailing
edge has moved past the pre-registration roller paper sensor (S2) and then is stopped.
Pre-registration roller
paper sensor (S2)
5) The copier's scanner starts copying operation.
2-64
F02-208-03
F02-208-04
Copying
F02-208-05
COPYRIGHT © 2001 CANON INC. 2000 2000 2000 2000 CANON DADF-J1 REV.0 MAR.2001