Canon DADF-J1 Service Manual page 116

3) Disconnect the connector [4] of the
pickup motor unit [3] and the connector
[7] of the open/closed sensor (rear) [5].
4) Remove the two mounting screws [7],
and detach the pickup motor unit [3].
2.1.4 Removing the Belt Motor Unit
1) Remove the separation motor unit and
the pickup motor unit.
2) Disconnect the connector J72 [2] of the
belt motor driver PCB [1].
COPYRIGHT © 2001 CANON INC. 2000 2000 2000 2000 CANON DADF-J1 REV.0 MAR.2001
CHAPTER 3 MECHANICAL SYSTEMS
[3]
[4]
F03-201-07
[3]
F03-201-08
[2]
F03-201-09
[5]
[6]
[7]
[1]
3-9