Canon DADF-J1 Service Manual page 132

3.1.7 Removing the Separation Belt
1) Remove the two screws, and loosen the
separation unit.
2) Remove the grip ring [1] at the front;
then, remove the clutch ring [2] and the
clutch [3].
3) Disconnect the two connectors [4], and
remove the two screws [5]; then, detach
the separation unit [6].
COPYRIGHT © 2001 CANON INC. 2000 2000 2000 2000 CANON DADF-J1 REV.0 MAR.2001
CHAPTER 3 MECHANICAL SYSTEMS
[1]
F03-301-33
[4]
F03-301-34a
F03-301-34b
[3]
[2]
[5]
[6]
[5]
[6]
3-25