Canon DADF-J1 Service Manual page 111

CHAPTER 3 MECHANICAL SYSTEMS
3) When you have removed the ADF con-
troller cover, disconnect the connector
[3] of the ADF controller PCB; then,
remove the screw [4], and remove the
grounding wire [5]. Free the harness
from the wire saddle [6], and detach the
other saddle [7].
4) Remove the four screws [8], and detach
the main cover [9].
The main cover is fitted with the
original tray [10], and cables are
connected to it. Take extra care
when removing it not to damage
the cables.
3-4
COPYRIGHT © 2001 CANON INC.
Push.
F03-101-05c
[8] [10]
[9]
F03-101-06
2000 2000 2000 2000 CANON DADF-J1 REV.0 MAR.2001
[7]
Freed.
[5]
[4]
[6]
[3]
[8]
[8]
[8]