Canon DADF-J1 Service Manual page 160

3) Place a separate sheet of copy paper
over the output obtained in step 2) to
check the right angel.
A<1 mm
B<1 mm
4) If the value is not as indicated, loosen
the fixing nut found at the rear of the
right hinge unit; then, make adjustments
by turning the adjusting screws.
When turning the adjusting
screw, be sure to keep the
DADF open.
5) Tighten the fixing nut to secure the ad-
justing screw.
COPYRIGHT © 2001 CANON INC. 2000 2000 2000 2000 CANON DADF-J1 REV.0 MAR.2001
CHAPTER 5 TROUBLESHOOTING
Feeding
direction
Output obtained in step 2)
Feeding
direction
Separate copy
paper
Output obtained in step 2)
F05-101-05
Adjusting screw
If A>0, turn the adjusting screw counterclock-
wise.
If B>0, turn the adjusting screw clockwise.
F05-101-06
Separate copy
paper
Fixing nut
5-3