Canon DADF-J1 Service Manual page 120

7) Remove the screw [10], and detach the
delivery sensor support plate [11] on the
delivery assembly rear side plate side.
8) Remove the screw [12], and detach the
delivery guide support plate [13] on the
delivery assembly rear side plate side.
9) Remove the screw [14], and detach the
delivery lower guide support plate [15]
on the delivery assembly front plate
side.
10) Remove the E-ring [16] from the deliv-
ery assembly front plate side; then, re-
move the screw [17], and detach the
bushing [18].
COPYRIGHT © 2001 CANON INC. 2000 2000 2000 2000 CANON DADF-J1 REV.0 MAR.2001
CHAPTER 3 MECHANICAL SYSTEMS
[11]
F03-301-03
[13]
F03-301-04
F03-301-05
[10]
[12]
[16]
[18]
[17]
[14]
[15]
3-13