Canon DADF-J1 Service Manual page 18

CHAPTER 1 GENERAL DESCRIPTION
4 Using the DADF
4.1 Original Set Indicator
The Original Set Indicator goes on when an original is placed on the original tray, and
flashes when a jam occurs.
Original Set indicator
4.2 Warnings and Action to Take
If the Original Set indicator starts to flash while an original is inside the DADF, suspect a
jam; go through the following to remove the jam:
1) Remove all originals from the original tray.
2) Open the upper cover, and remove the jam, if found.
3) Open the DADF, and remove the original from the copyboard glass, if found.
4) Put the originals back into initial sequence, and place the stack in the DADF.
1-6
F01-401-01
COPYRIGHT © 2001 CANON INC. 2000 2000 2000 2000 CANON DADF-J1 REV.0 MAR.2001