Canon DADF-J1 Service Manual page 223

CHAPTER 5 TROUBLESHOOTING
Function
Adjustment
5-66
Setting
Manual Feed Arch Adjustment
Press the push switch SW2 on the ADF controller
PCB to start, and use the push switch SW3/SW4 to
make adjustments. At the end, press the push switch
SW2 to store the new setting. (For details, see p. 5-
31.)
Feeding Belt Speed Adjustment (reproduction ratio in
stream reading)
Press the push switch SW2 on the ADF controller to
start, and use the push switch SW3/SW4 to make
adjustments. At the end, press the push switch SW2
to store the new setting. (For details, see p. 5-34.)
Reversal Speed Adjustment
Press the push switch SW2 on the ADF controller
PCB to start, and use the push switch SW3/SW4 to
make adjustments. At the end, press the push switch
SW2 to store the new setting. (For details, see p. 5-
36.)
Original Stop Position Adjustment
Press the push switch SW2 on the ADF controller
PCB to start, and use the push switch SW3/SW4 to
make adjustments. At the end, press the push switch
SW2 to store the new setting. (For details, see p. 5-
20.)
Manual Feed Original Stop Position Adjustment
Press the push switch SW2 on the ADF controller
PCB to start, and use the push switch SW3/SW4 to
make adjustments. A the end, press the push switch
SW2 to store the new setting. (For details, see p. 5-
23.)
Sensor and Delivery Motor Auto Adjustment
Press the push switch SW2 on the ADF controller
PCB. The operation will end automatically. (For de-
tails, see p. 5-27.)
T05-401-01c
COPYRIGHT © 2001 CANON INC.
Description
2000 2000 2000 2000 CANON DADF-J1 REV.0 MAR.2001