Teledyne First Responder CG User Handbook Manual page 94

FIRST RESPONDER CG - USER HANDBOOK
The Swan Neck Probe (Part No. 13655) has a number of
small balanced holes in the probe length to give increased
coverage in surveys. To prevent damage to the probe
and provide an unrestricted sample path, the probe is
supplied with a shroud assembly incorporating two skids
which prevent probe contact with the ground surface. The
Swan Neck Probe is of stainless steel construction and is
generally used with the Probe Adaptor which connects to
the Probe Handle Assembly (Part No. 13561). The Probe
Handle incorporates a sample line which is connected to the
instrument and allows the pump to draw the sample into the
instrument analysing chamber.
Note: This model of Probe Handle does not incorporate an
in-line filter. A Water Filter Assembly (Part No. 42183) or
Dust Filter Assembly (Part No. 42184) is available and can
be fitted as an accessory, if required. Refer to Chapter 7
ACCESSORIES.
C-10