Teledyne First Responder CG User Handbook Manual page 86

FIRST RESPONDER CG - USER HANDBOOK
The Plastic Probe (Part No. 12393) is generally used with
the Probe Handle Assembly (Part No. 12481), incorporating
both Cotton and Hydrophobic Filters to prevent the ingress
of water or dirt. The Sample Line (Part No. 12712) connects
the probe handle to the instrument and allows the pump to
draw the sample into the instrument analysing chamber.
The probe is manufactured from a plastic material which
is flexible and extremely robust. The probes wall thickness
provides the flexible strength to withstand bending around
a 50cm radius or sustaining damage to, or collapse of, the
sampling path if accidentally stood on, by the operator.
Note: The Sample Line, Probe Handle Assembly and
Filters are all supplied with the instrument. A longer probe,
if required, is available as an accessory. Refer to Chapter
7 ACCESSORIES.
C-2