Setting The Width Of The History Marker - Furuno FSV-24 Operator's Manual

5. HISTORY MODE
(3)
(2)
R: Range (Range set by RANGE control)
r: Slant range to history marker, set with trackball. Automatically changes with tilt angle.
d: Depth (constant) to history marker
5.3.3

Setting the width of the history marker

You may set the width of the history marker as follows:
1. Press the [MENU] key to open the menu.
2. Select OTHERS and press the [MENU] key.
3. Select DISPLAY SETTING and press the [MENU] key.
5-4
d
d
(1)
R
History marker
Figure 5-5 Slant range and tilt angle
OTHERS
DISPLAY SETTING
DISPLAY MODE...
MODE SELECTION
PRESENTATION MODE : HEAD UP
TM DISPLAY RANGE
BEARING REF
H-SLICE WIDTH
H-SLICE PICT ADVC
NET COURSE MARK
MANUAL DEGAUSS
AUTO DEGAUSS
DIMMER
KEY BEEP VOLUME
Figure 5-6 DISPLAY SETTING menu
The slant range is automatically changed whenever
r the tilt angle is changed, to keep the history marker
at a constant depth. When a shallow tilt angle is used,
the picture inside the history marker is
® ®
from (1) (2)
MENU QUIT
QUIT
QUIT
: MODE KEY
: 1.6R
: SHIP HEADING
: 16
: KP SYNC
: ENTER
: EXECUTE
: INT SENSOR
: 10
: 5
(3), according to tilt angle.