Picture Advance Speed - Furuno FSV-24 Operator's Manual

4.6

Picture Advance Speed

The picture advance speed determines how quickly the vertical scan lines run
across the screen. When selecting a picture advance speed, keep in mind that a
fast advance speed will expand a fish school horizontally and a slow advance
speed will contract it.
Note: Adjust the Picture Advance Speed as same as the echo sounder
connected. This setting does not affect the original echo sounder setting.
1. Press the [MENU] key to open the menu.
2. Select OTHERS and press the [MENU] key.
3. Select ES1 SETTING (or ES2 SETTING) and press the [MENU] key.
4. Select PICTURE ADVANCE and press the [MENU] key.
4. Use the trackball to select advance speed desired and press the [MENU] key.
The fractions in the dialog box are one line produced per number of
transmissions. For example, 1/2, displays one scan line per two
transmissions. SPEED SYNC advances the picture according to ship's speed.
This mode is advantageous for judging fish school size and abundance since
fish schools will be shown at their actual sizes regardless of ship's speed.
Note: When using "SPEED SYNC," and the echo sounder signal becomes
6. Select QUIT and press the [MENU] key.
7. Select QUIT at the top of the menu screen and press the [MENU] key to
close the menu.
Figure 4-16 Picture advance speed dialog box
lost, the picture shown at the time the signal was lost is copied and
continuously replayed on the screen until the echo sounder signal is
restored.
QUIT
CANCEL
1/1
1/2
1/4
1/8
SPEED SYNC
4. ECHO SOUNDER MODE
4-11