Table of Contents
Advertisement
3. Select menu item desired with the trackball and press the [MENU] key. (For
example, select NOISE LIMITER.) A dialog box for the corresponding menu
item appears.
MENU
H-SCAN SETTING
TX INTERVAL
TX PULSE LENGTH
TX POWER
TVG-NEAR
TVG-MEDIUM
TVG-FAR
NOISE LIMITER
NOISE LIMITER
AGC
2ND AGC
ECHO AVERAGE
INT REJECT
FREQ SHIFT
OTHERS...
4. Select
(raise setting) or
[MENU] key to change setting.
Note: For items having options the arrows in the dialog box are replaced with
appropriate options. For example the dialog box for selection of picture
advance speed in the echo sounder mode looks as below.
Figure 1-19 Echo sounder picture advance speed dialog box
5. Use the trackball to select QUIT from the dialog box and press the [MENU]
key to close the menu.
6. Select QUIT at the top of the menu screen and press the [MENU] key to
close all menus.
QUIT
QUIT
: 9
: 9
: 9
: 0
: 0
: 0
: 5
: 2
QUIT
: 0
CANCEL
: 0
: 0
: 0
: 1
Figure 1-18 H-SCAN SETTING menu
(lower setting) with the trackball and press the
QUIT
CANCEL
1/1
1/2
1/4
1/8
SPEED SYNC
1. OPERATIONAL OVERVIEW
How to set numeric data
1. Select
or
as desired.
2. Press the [MENU] key to
change setting.
3. Select QUIT to finish.
1-13
Advertisement
Table of Contents
Troubleshooting
