Furuno FSV-24 Operator's Manual page 137

RANGE & BEARING: Turns on/off the range and bearing data which appears
when the range and bearing marks are turned on.
TRACKBALL MARK L/L: Turns on/off the trackball mark position (latitude and
longitude) display. If there is not position data this display appears in red.
Requires navigation data.
COURSE: Selects how to display course: 32 compass points, 360 True,
360 Relative, 180 Relative.
CURRENT DATA: Selects how to display tidal current data; 32 compass points,
360 True, 360 Relative, 180 Relative.
EVENT MARK: Selects how to display event mark data; 32 compass points,
360 True, 360 Relative, 180 Relative.
OTHER MARKS: Selects how to display other mark data; 32 compass points,
360 True, 360 Relative, 180 Relative.
DISPLAY SETTING: Turns on/off menu-set indications related to transmitting
and receiving.
DISTANCE FOR SHOOT: Selects the distance run unit to show the distance run
after shooting the net. The choices are miles, meters and feet.
WATER TEMP: Chooses water temperature unit; in C (Celsius) or F
(Fahrenheit).
CURRENT VEC & WIND menu
This menu sets up tidal current and wind data. The default settings are shown in
the illustration below.
Figure 8-18 CURRENT VEC & WIND menu
CURRENT DATA: Chooses how to display current data; absolute or in relation
to layer 1, layer 2 or layer 3.
ON OWN SHIP MARK: Selects whether to show the current mark on the own
ship mark or not.
MENU
OTHERS
INITIAL SETTING
CURRENT VEC & WIND
CURRENT DATA : ABSOLUTE
ON OWN SHIP MARK : ON
ON SHIP POS MARK : ON
ON NET SHOOT MARK : ON
CURRENT FLOW DIR : TO
WIND : OFF
8. OTHERS MENU
QUIT
QUIT
QUIT
QUIT
8-11