Checking the fuses
Danger
Removing the fuse does not switch the power
circuit to zero volt. Contact with 'live' compo-
nents can lead to serious injury from electric cur-
rent.
Before working on the equipment, always
ensure that the power circuit is also at zero
volt.
The appliance is too noisy
Possible causes:
■
Transport bracket not removed: See page 21.
■
Hose outlets in diaphragm grommets are leaking:
See page 51.
Casing door not tightly closed: See page 69.
■
Condensation and moisture in the heat pump module
Possible causes:
■
Hose outlets in diaphragm grommets are leaking:
See page 51.
Casing door not tightly closed: See page 69.
■
Outer panels not diffusion-proof
■
(cont.)
Maintenance
75