Maintenance; Recommended Maintenance Schedule(S) - Toro MB-1600 Operator's Manual

Maintenance

Note: Determine the left and right sides of the machine from the normal operating position.

Recommended Maintenance Schedule(s)

Maintenance Service
Interval
After the first 50 hours
Before each use or daily
Every 40 hours
Every 50 hours
Every 100 hours
Every 200 hours
Every 300 hours
Every 1,000 hours
Every 1,500 hours
Yearly
Yearly or before storage
Important: Refer to your engine owner's manual for additional maintenance procedures.
Maintenance Procedure
• Change the engine oil.
• Check the engine oil level.
• Check the hydraulic fluid level.
• Check service brake operation.
• Check parking brake operation.
• Remove debris from the machine.
• Check for loose fasteners.
• Check the condition of the tires.
• Check the lug nuts.
• Check the hydraulic lines for leaks, loose fittings, kinked lines, loose mounting
supports, wear, and deterioration.
• Grease and oil the machine.
• Clean the air cleaner.
• Change the engine oil.
• Check/adjust the spark plug.
• Clean the sediment cup.
• Replace the hydraulic filter.
• Change the hydraulic fluid.
• Replace the paper element.
• Replace the spark plug.
• Change the fuel filter.
• Drain and flush the fuel tank.
• Replace all moving hydraulic hoses.
• Pack wheel bearings.
• Touch up chipped paint
18