Using the Quick-release Tire
Hubs
The quick-release tire system allows quick removal of the
outer machine tires. The quick-release system allows the
machine to be converted from a 117 cm (46 inch) to a 91
cm (36 inch) wide machine without any special tools for hub
removal.
1. Position the inner wheel of the machine over a 2x4 and
apply the parking brake.
2. Remove the large tee bolt in the center of the wheel
with a crow bar (Figure 16).
1
Figure 16
1. Tee bolt
3. Remove the outside wheel with quick-change hub
attached.
4. Repeat above steps on opposite side of machine.
WARNING
The maximum payload is reduced to 850 kg
(1875 lb) when operating the machine without
the dual wheels.
g019624
17