Forks Safety; Maintenance And Storage Safety; Safety And Instructional Decals - Toro 23175 Operator's Manual

Forks Safety

•
Always lower the attachment and shut off the
machine each time you leave the operating
position.
•
Clean any dirt or debris that may hinder connecting
the attachment to the machine. Ensure that the
attachment-locking pins are fully seated in the
holes of the attachment-mount plate. Refer to the
Operator's Manual for the machine for detailed
information on safely connecting an attachment to
your machine.
•
When lifting the attachment keep it level and
prevent the load from spilling backward.
•
Inspect the forks for damage after each use.
Maintenance and Storage
Safety
•
Check fasteners at frequent intervals for proper
tightness to ensure that the equipment is in safe
operating condition.
•
Refer to this Operator's Manual for important
details if you store the attachment for an extended
period of time.
•
Maintain or replace safety and instruction labels,
as necessary.
Safety and Instructional
Decals
Safety decals and instructions are
easily visible to the operator and are
located near any area of potential
danger. Replace any decal that is
damaged or missing.
Decal 139-4779 is only on Model 22586.
1. Tipping hazard—read the Operator's Manual for load
limits; the maximum load capacity for the TX 1300 with the
attachment retracted is 408 kg (900 lb); the maximum load
capacity for the TX 1300 with the attachment extended is
226 kg (500 lb); the maximum load capacity for the TX 1000
with tracks installed and the attachment retracted is 272
kg (600 lb); the maximum load capacity for the TX 1000
with tracks installed and the attachment extended or the TX
1000 with wheels installed and the attachment retracted
is 99 kg (220 lb).
Decals 161-1097 and 161-1098 are only on Model
23175.
1. Attention—read the Operator's Manual.
1. Falling hazard—do not stand on the forks.
5
133-8061
139-4779
161-1097
161-1098
decal133-8061
decal139-4779
decal161-1097
decal161-1098