Checking The Tires And Lug Nuts; Controls System Maintenance; Brake Maintenance - Toro MB-1600 Operator's Manual

Checking the Tires and Lug
Nuts
Service Interval: Every 40 hours—Check the condition of
the tires.
Every 40 hours—Check the lug nuts.
•
Inspect tires for cuts, slashes, or bulges. Tires with defects
need to be replaced or repaired for proper handling and
safety.
•
Check weekly to make sure all lug nuts are tight. Torque
the lug nuts to 122 N-m (90 ft-lbs). This is important on
new machines or newly replaced wheels.
Controls System
Maintenance

Brake Maintenance

WARNING
If the brakes are not properly adjusted, serious
injury, or death, may occur.
Check your brakes daily. If you encounter any
problems with the brakes while operating the
machine, stop the machine immediately and bring
it to an Authorized Toro Service Dealer for repair.
Checking the Service Brake
Service Interval: Before each use or daily
1. Move the machine to a level, open area.
2. Pull the parking brake lever up to engage the brake and
start the engine (Figure 29).
1
1. Engaged position
3. Set the engine throttle to Fast.
4. Step on the service brake pedal (Figure 30).
25
G020704
Figure 29
2. Disengaged position
2