Premaintenance
Procedures
Removing the Cowl
Note: You must dump the hopper before you remove the
cowl. This can be done by either using the hydraulics, or by
removing the pin in the hydraulic cylinder and the hopper
base.
1. Before removing the cowl (Figure 17), stop the engine
and allow the engine to cool.
1
g019788
Figure 17
1. Cowl
2. Unhook the cowl latches (Figure 18) and remove the
cowl.
g019604
1. Cowl latch
3. Install the cowl and secure the latches upon completion
of the task.
19
1
Figure 18